Gerber GSx Plus, User Manual, Page: 36 / 60

35
Error Codes
The error code numbers and suggested operator responses are listed below.
Error code numbers are also listed on the User Reference Card.
Error
Number
Description
Operator Response
1 Program checksum
failure
Try power-up again.
2 RAM memory failure Try power-up again.
3 RS-232 test failure Try power-up again.
4 Illegal plot data
command Check plot data;
resubmit job.
5 Corrupt data Check plot data;
resubmit job.
6 Buffer overflow Contact Gerber Field
Service.
7 UART error Only occurs as part of
self-test; try power-up
again.
8 *Z axes lock time-out Power up again, holding
RESET key
9 Z axis error Turn off system; check
connectors.
10 Theta home failure Turn off system; check
connectors
*Error code occurs in Special Diagnostic mode, if axes remain locked more than 30 minutes.
If the plotter consistently fails the self-check tests, contact Gerber Field Service
Department at 800-828-5406, or fax at 860-871-3862