Symptom
Cause of Failure
Recommendation
The
GPS-2000
does not
work and the LED light is
off
1. The
GPS-2000
is not
plugged into the
electrical outlet
properly
1.Check power connect properly
2. The Switch is broken
2. Don’t open up the Switch and send
back for repair.
The LED light is on, but
cannot turn ON or OFF
GPS-2000
1. Check if the load
plugged into the Switch
has its own ON/OFF
switch
1. Toggle the ON/OFF switch of the load
to ON
2. Is not carrying out
association
2. Carry out association
3. Same frequency
interference
3.Wait for a while to re-try
Specification
Operating Voltage
100~120Vac/ 60Hz; 220~240Vac/ 50Hz
Maximum Load
10A (
Resistive Load)
Range
Minimum 40 m in door 100m outdoor line of sight
Operating Temperature
0°C ~ 40°C
Frequency Range
868.4MHz & 869.85MHz/ EU (
GPS-2000
-1)
908.4MHz & 916.0MHz/ US (
GPS-2000
-2)
922~927MHz/ Taiwan/ Japan (
GPS-2000
-3)
916MHz/Israel(
GPS-2000
-7)
** Specifications are subject to change and improvement without notice.
FCC ID : 2AQO4GPS-2000
Warning:
1.
Do not exceed the max loading
.
Disposal
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safe recycling
Company of License Holder
：
Gerber Technology 2016 LTD
Address of License Holder
：
75 Haerez St., Kfar Hanagid, Israel, 7687500
15