Instructions for Use
Spirostik
Serial no.: xx|8|001|yyy and 2001xxxxx
Page 56
Version: 6 | Release date: 14. July 2021
9.2
Disinfection
All parts of the Spirostik can be cleaned of dirt with a soft cloth
using a cleaning solution / weak soapy water.
All parts of Spirostik which come into contact, or could come
into contact, with the patient must be treated with a surface
disinfection. Otherwise, these can be wiped with a soft cloth
using a weak soap solution.
When using a disinfectant that has not been tested and
approved by the manufacturer, the following steps must be
observed:
•
Preferably use agents that correspond in composition to
the approved agents. The composition is available on
data sheets, which we can provide on request.
•
Check bactericidal and virucidal effect suitable for the
intended use.
•
Use only disinfectants listed in public databases (e.g.
RKI)
•
Check data sheet for material compatibility with plastics
(especially polyoxymethylene, polystyrene, acrylonitrile
butadiene styrene, Makrolon®) as well as metal
•
First test the disinfectant for material compatibility in an
inconspicuous place.
•
During the regular visual inspection for damage, also
pay attention to material changes (discoloration, cracks,
embrittlement...)
•
Observe long-term trend of calibrations for changes in
measuring function
The manufacturer accepts no liability for any resulting equipment
damage or any consequential damage caused by the use of
disinfectants that have not been tested and approved by the
manufacturer.
