Instructions for Use
Spirostik
Serial no.: xx|8|001|yyy and 2001xxxxx
Page 54
Version: 6 | Release date: 14. July 2021
8.2.1.2
Checking / Replacing the Handle
When inspecting the sealing rubber on the Spirostik handle each
day, you must take into account mechanical damage or signs of
wear. If necessary, the handle must be replaced completely. In
general, this should be replaced once per year.
To do this, proceed as follows:
1.
Remove the used handle [1].
For this:
Carefully remove both tubes (blue, white)
off the Spirostik connector [1].
2.
Mount a new handle [2].
For this:
Push the two tubes of the new handle
(blue, white) onto the connecting pieces
of the Spirostik as far as possible [2],
taking care to.
3.
Slide the blue tube onto the
connection piece with the marking
(blue, slightly highlighted ring [3]).
When sliding the blue tube onto the Spirostik, make sure that
the connection is correct!
1
3
2
