Instructions for Use
Spirostik
Serial no.: xx|8|001|yyy and 2001xxxxx
Page 52
Version: 6 | Release date: 14. July 2021
Attention
Independent of this, the user / operator must carry out regular checks
during day-to-day operation, see also the following chap. 8.2
“Servicing / Maintenance by the User / Operator”!
8.2
Servicing / Maintenance by the User / Operator
In order to ensure a flawless operation of Spirostik over its whole
service life, regular servicing and repairs, if applicable, are
required.
Interval
Servicing work
Once per day
Visual checks of the device and its components for
damage and replacing them if necessary
(see chap. 8.2.1 “Checking for Damage”)
Once per day
Checking the sealing rubber of the head for tears / wear
and replacing the head if necessary
(see chap. 8.2.1.2 “Checking / Replacing the Handle”)
Once per year
Replacing the head
(see chap. 8.2.1.2 “Checking / Replacing the Handle”)
Possible danger to life.
Reason: Electric shock. Misdiagnosis caused by
measurement error. For this: Ensure that the used
components are undamaged and that you are working
in a careful way! Therefore:
•
Prior to each use, visually inspect the total
system (housing, connectors, etc.) for any
damages!
•
If there are any damages, do not operate the
system. The damaged parts must be replaced
or repaired properly!
