manualshive.com logo in svg

GeoVision GV-VS12, User Manual, Page: 65 / 133

Share
Download
GeoVision GV-VS12 User Manual Download Page 65

 

Administrator Mode

 

4

4.5.2  I/O Monitoring Settings 

You can set the schedule for I/O monitoring to start. 

 

                                         

     

   Figure 4-24 

„

 

Span 1-3: 

 Set different time frames during the day to enable I/O monitoring. Each day 

can be divided into 3 time frames, represented by Span 1 to Span 3. 

„

 

Weekend:

 If you don’t want to apply the span settings to the weekend and need the 

I/O monitoring for the whole day, enable this option and select whether your weekend 
includes 

Saturday and Sunday

 or 

Only Sunday

. 

„

 

Special Day:

 Enable I/O monitoring on a specified day. 

 

4.6  Remote ViewLog 

With the Remote ViewLog function, you can play back the files recorded at the GV-Video 
Server over TCP/IP network. 

 

For the first-time user, you need to install the Remote ViewLog program from the Software 
DVD. For remote access to the GV-Video Server, the 

ViewLog Server

 built in the unit 

must be enabled. See 

4.3.6 ViewLog Server

. 

 
For details on connecting to the GV-Video Server for playback , see 

5.2.2 Playback Using 

Remote ViewLog

. 

 

 

57

Summary of Contents for GV-VS12






































































































































Reviews:

No comments