manualshive.com logo in svg

GeoVision GV-VS12, User Manual, Page: 19 / 133

Share
Download
GeoVision GV-VS12 User Manual Download Page 19

 

Getting Started

 

 

2

1.  Open your web browser, and type the default IP address 

http://192.168.0.10

 

2.  In both Login and Password fields, type the default value 

admin

. Click 

Apply

. 

3.  In the left menu, select 

Network

 and then

 LAN

 to begin the network settings. 

 

 Figure 2-2 

4. Select 

Static IP address

. Type IP Address, Subnet Mask, Router/Gateway, Primary 

DNS and Secondary DNS

 

in the 

Configure connection parameters

 section. 

 

5. Click 

Apply

. The GV-Video Server is accessible by entering the assigned IP address 

on the web browser.

 

Important:  

•

 

Dynamic IP Address

 and

 PPPoE

 should only be enabled if you know which IP 

address the GV-Video Server will get from the DHCP server or ISP. Otherwise, 
you must use the Dynamic DNS service to obtain a domain name linked to the 
GV-Video Server’s changing IP address first.   

For details on Dynamic DNS Server settings, see

 4.7.3 Advanced TCP/IP.

 

•

 If 

Dynamic IP Address

 and 

PPPoE

 is enabled and you cannot access the unit, 

you may have to reset it to the factory default settings and then perform the 
network settings again.   

To restore the factory settings, see the 

Default 

button in 

1.5.1 Front View

. 

 
 

 

11

Summary of Contents for GV-VS12






































































































































Reviews:

No comments