Administrator Mode
4
To enable the GV-GIS connection:
1.
Activate Link:
Enable the monitoring through GV-GIS.
2.
Host Name or IP Address:
Type the host name or IP address of GV-GIS.
3.
Port Number:
Match the communication port on GV-GIS. Or keep the default value
3356.
4.
User Name:
Type a valid user name to log into GV-GIS.
5.
Password:
Type a valid password to log into GV-GIS.
6. Click
Apply.
The Connection Status should display “Connected” and connected time.
These options you can also find on the GV-GIS setting page:
Cease motion detection messages from:
Stops notifying GV-GIS of motion
detection from selected camera(s).
Cease input trigger messages from:
Stops notifying GV-GIS of input trigger from
selected input(s).
Enable schedule mode:
Starts the monitoring through GV-GIS based on the schedule
you set in the
Select Schedule Time
section. Refer to
4.5 Recording Schedule
for the
same settings.
For related settings to activate the monitoring through GV-GIS, see
4.1.3 Motion Detection
,
and
4.2.2 Input/Output Setting
.
53