manualshive.com logo in svg

GeoVision GV-VS12, User Manual, Page: 126 / 133

Share
Download
GeoVision GV-VS12 User Manual Download Page 126

 

 

118 

10.3.2  Activating the SSView V3 Function 

To allow remote access to the GV-Video Server, you must select 

3GPP, MSViewV2, 

SSViewV3 Supported

 to be the connection type in the Connection Template field on the 

Video Settings page. For details, see “Connection Template” in 

4.1.2 Video Settings

.  

 

10.3.3  Connecting to GV-Video Server  

The following operations may vary slightly for different modules. 
 
1. Execute 

SSView 

on your smartphone.  

2.  When the message 

SSView V3 

appears, select 

Options

, and select

 Live Connect

. 

The login screen appears. 

 

              

  Figure 10-16 

3.  Enter the IP address of your GV-Video Server, port value (default value is 10000), a 

username and a password. Then click 

Options

 and select 

Connect.

  

4.  Once the connection is established, the live image will appear. 

 

               

   Figure 10-17 

Summary of Contents for GV-VS12






































































































































Reviews:

No comments