Operation
23
7
7. Operation
1. Mount the camera on the mounting bracket by using the hole on the top or bottom
of the camera, and by using the enclosed mounting block, secured by 2 screws.
2. Connect the video output to the monitor or other video device via a 75 Ohms type
coaxial cable.
3. Power Input Terminal (Dual Power): the camera accepts both AC 24V and DC 12 V
power sources (non-polarity).
7.1 PELCO Keyboard (or compatible) Operation
OSD Setup Menu Mode
PELCO Keyboard
Camera Function
OPEN
Sub Menu Enter
CLOSE
Sub Menu Exit
Move Joystick Left
Decrease (-)
Move Joystick Right
Increase (+)
Move Joystick Up
Cursor Up
Move Joystick Down
Cursor Down
Connecting PELCO keyboard with the camera:
1. Find the DIP switch at keyboard back panel and press down No. 5, 6, and 7 to
meet the required speed (2400).
2. Press buttons 0, 1 and CAM on the keyboard to set the camera ID.
3. Press buttons 9, 5 and PRESET for startup.
4. Press OPEN button to show the OSD menu for further camera control.
<Note>
•
Refer to PELCO Keyboard manual for more information.
Summary of Contents for GV-HD-SDI
Page 4: ...2...
Page 37: ...Specifications 35 9...