22
IR Illuminator Installation
1. Connect DNI and GND of the camera to the DNI and GND of the IR Illuminator (of
camera control).
2. To automatically switching between night and day modes:
•
If the operating IR illuminator (of camera control) is of high voltage (5 V), on
the OSD menu, select
Camera Setup
and set Day/Night Mode to
AUTO
(default value). Then select
Camera Setup
and set DI/DO to
DI/H : DO/L
or
DI/L : DO/L
(both selections are okay).
•
If the operating IR illuminator (of camera control) is of low voltage (0 V), on
the OSD menu, select
Camera Setup
and set Day/Night Mode to
AUTO
(default value). Then select
Camera Setup
and set DI/DO to
DI/H : DO/H
or
DI/L : DO/H
(both selections are okay).
3. To remain the camera on the night mode,
•
If the operating IR illuminator (of camera control) is of high voltage (5 V), on
the OSD menu, select
Camera Setup
and set Day/Night Mode to
NIGHT
.
Then select
Camera Setup
and set DI/DO to
DI/H : DO/H
or
DI/L : DO/H
(both selections are okay)..
•
If the operating IR illuminator (of camera control) is of low voltage (0 V), on
the OSD menu, select
Camera Setup
and set Day/Night Mode to
NIGHT
.
Then select
Camera Setup
and set DI/DO to
DI/H : DO/L
or
DI/L : DO/L
(both selections are okay).
4. To have the IR illuminator (with light sensor) working with the IR illuminator (of
Camera Control) together, see Step 5 of
Light Sensor Installation
mentioned
earlier.
For the OSD settings, see
8.2.3 DAY/NIGHT Setup
and
8.2 Sub Menu Description
.
Summary of Contents for GV-HD-SDI
Page 4: ...2...
Page 37: ...Specifications 35 9...
