12
1.6.2 In-Ceiling Mount
In-Ceiling Mount allows the camera to be mounted into the ceiling, revealing a small portion
of the camera. In-Ceiling Mount requires the ceiling board to be between 0.5 – 3.0 cm (0.2 –
1.18 in) thick.
1. Place the installation sticker on the ceiling board, and cut the circle part out of the ceiling.
Figure 1-10
2. Align the 3 support brackets with the holes on the back of the camera as shown below
and secure using the in-ceiling mount screws provided.
Figure 1-11
3. For GV-FER521, install the supplied cable connector to waterproof the cable. Refer to
step 5 in
1.6.1 Hard Ceiling Mount
for details.
