Advanced Applications
111
6
6.3 Restoring to Factory Default Settings
You can restore the camera to factory default settings using the Web interface or directly on
the camera.
6.3.1 Using the Web Interface
To restore to default settings using the Web interface:
1. In the left menu, select
Management
and select
Tools
.
2. Under the
System Settings
section, click the
Load Default
button.
6.3.2 Directly on the Camera
For GV-FE110 / FE111
1. Unplug the power cable and the network cable.
2. To access the
Load default
button, first remove the outer shell of the camera. Refer
to
1.5 Physical Description
for details.
3. Use a pointy object such as the tip of a pen to hold down the
Load default
button
(No. 4, Figure 1-2) while plugging the power cable and the network cable.
4. Wait until the network status LED turns off momentarily to release the
Load default
button. This may take about 40 seconds.
5. The system status LED should turn back on. The process of loading default settings
is completed and the camera reboots automatically.
For GV-FE2301 / FE420 / FE421 / FE4301 / FE520 / FE521 and GV-FER521
1. Remove the outer shell of the camera by unscrewing the screws indicated below
and then removing the outer shell of the camera.
2. Use a pointy object such as the tip of a pen to hold down the
Load Default
button
labeled below.
3. Release the default button when the status LED blinks.
4. When the status LED fades, the process of loading default settings is completed and
the camera reboots automatically.
