10
1.6.1 Hard Ceiling Mount
1. Place the installation sticker on the ceiling board. The 3 red dots indicate the location of
the screws.
Figure 1-4
2. At the 3 red dots, drill a hole slightly smaller than the plastic screw anchors provided.
3. Insert the 3 plastic screw anchors in the drilled holes.
4. Secure the fisheye camera with the 3 hard ceiling mount screws provided.
Figure 1-5
5. For GV-FER521, install the supplied cable connector to waterproof the cable. You should
have 5 components:
Figure 1-6
a. Prepare an internet cable with the RJ-45 connector on one end only.
b. Connect the internet cable to the camera cable.
