10
3.6 Connecting the Power
You can choose to supply power using a power adapter or using a Power over Ethernet (PoE)
adapter.
When using a Power Adaptor, connect 12V and GND wires to a 12V, 3A power adapter
and then connect the power adapter to a power source.
The table below shows the pin assignments of the power connectors on GV-CS1320.
When using PoE adapter, power will be provided to the device through the Ethernet
cable.
Note:
1. Power should only be applied to the unit when all connections are completed and tested.
2. GV-CS1320 produces an output voltage of 12V. You will need to connect an external
power supply if the total power consumption exceeds 12V after readers and output
devices are connected.
Wire color
GV-CS1320 Definition
Red 12V
DC
Black GND
