i
Installation Considerations
To make sure the finger and face of the cardholder can be detected, follow the instructions
below to set up GV-CS1320.
Bell Button Recognition:
The bell button cannot be responded with gloves on.
Installation Height:
When placed at a building gate, GV-CS1320 should be about 1.4-1.5 meters above the
ground.
When placed at a parking lot gate, GV-CS1320 should be about 1.2 meters above the
ground to match the height of vehicles.
Face Detection Limitations
GV-CS1320 cannot detect the face of cardholders wearing facial masks or sunglasses.
GV-CS1320 is designed to detect front-view faces only. If the face is slightly tilted
horizontally or vertically, the tilt angle cannot exceed 15° degree.
Lighting Conditions
Avoid placing GV-CS1320 where the light source is directly behind the subject.
Prevent light from directly falling onto the GV-CS1320’s camera lens.
