Administrator Mode
61
7
To configure the tampering alarm:
1. Select
the
Enable
option.
2.
If you want the camera to ignore any movement or scene change in
certain areas, click the
button to drag areas on the camera view.
3.
Select the desired detection sensitivity by moving the slider. The
higher the value, the more sensitive the camera is to scene changes.
4. In
the
Tolerance Time of Alarm
field, specify the time length allowed
for scene changes before an alarm is generated.
5. In
the
Duration of Alarm
field, specify the duration of the alarm after
which the triggered output device will be turned off.
6.
To trigger an alarm when the scene turns dark, e.g. the lens
of camera has been covered, select
Alarm for Dark Images
.
7. Click
Apply
to save all the settings.
8.
Start monitoring to enable the function. To have output alarm, it is
required to start
Input
monitoring. See
7.4 Monitoring.
When the camera has been tampered, the output device can be activated.
To turn off the output device immediately, return to this setting page, and
click
Restart Detection
.
Summary of Contents for GV-BX110D
Page 37: ...28 3 Fasten the philips head screws with the plastic screw spacers Figure 4 21 ...
Page 61: ...52 7 1 1 Video Settings Figure 7 2 ...
Page 89: ...80 Camera Status Icon On standby Enabled for motion detection and input trigger ...
Page 107: ...98 4 Click Query The filtering results may look like the figure below Figure 7 34 ...
