GeoVision GV-BX110D User Manual Download Page 91

Page: 91 / 175

7.5.2 I/O Monitoring Settings

Note this function is only available for

Box Camera

and

Bullet Camera

You can set the schedule for I/O monitoring to start.

Figure 7-21

Span 1- Span 3:

Set different time frames during the day to enable

I/O monitoring. Each day can be divided into 3 time frames,
represented by Span 1 to Span 3.

Weekend:

Enable this option to start I/O monitoring all day on the

weekend and define whether your weekend includes

Saturday and

Sunday

Only Sunday

Special Day:

Enable I/O monitoring on a specified day.

Note:

In Recording Schedule and I/O Monitoring Schedule, if the

settings for Special Day conflict with those for Span 1-3 or Weekend,
the Special Day settings will get priority.

Summary of Contents for GV-BX110D
















































































































































































Search results

Summary of Contents for GV-BX110D

Reviews:

Related manuals for GV-BX110D

Brands by name

Popular brands

GeoVision GV-BX110D, User Manual

Search results

Summary of Contents for GV-BX110D

Reviews:

Related manuals for GV-BX110D

Brands by name

Popular brands