manualshive.com logo in svg

GeoVision GV-BX110D, User Manual, Page: 130 / 175

Share
Download
GeoVision GV-BX110D User Manual Download Page 130

      

DVR Configurations

 

 

10 

10.1.1  Previewing Video and Setting Audio 

To preview video and activate audio,

 

click the desired IP camera (see 

Figure 10-6) on the connection list and select 

Preview & Audio Setting

. 

This dialog box appears. 

 

                   Figure 10-7 

[Preview selected camera] 

„

 

Drop-down List: 

Select the desired camera for live preview.

 

„

 

Preview dual stream record channel: 

The option is only available 

when the dual stream is selected, i.e. the cameras for live view and 
recording are configured differently (see Figure 10-5). Select this 
option for recording preview.

 

[Audio Setting] 

„

 

Monitor Sensitivity: 

Adjust the sensitivity of the audio that will be 

detected. The higher the value, the more sensitive the system is to 
the surrounding sound. 

 

„

 

Gain Control: 

Increase or decrease the gain of the microphone.

 

 

121

Summary of Contents for GV-BX110D
















































































































































































Reviews:

No comments