CMS configurations
11
Manual close channel:
Closes the triggered camera view
manually.
Close the camera view when motion stopped:
Closes the
triggered camera view automatically when motion stops.
Post Motion:
Specify the duration of the camera view remaining
on the monitoring window after motion stops.
Camera send by I/O trigger will monitor:
Specify the duration
of the camera view remaining on the monitoring window when an
I/O device is triggered.
To keep the camera view remaining on the monitoring window
even after the alarm is finished, click the right-arrow button, and
uncheck
Latch Trigger
. Then the camera view will keep
remaining on the monitoring window for the specified time. For
example, the alarm is triggered for 5 minutes and you set 10
minutes, which means the total display time will be 15 minutes.
For further information on how to mange the received video from the IP
camera, see
GV-CMS Series User’s manual.
129
Summary of Contents for GV-BX110D
Page 37: ...28 3 Fasten the philips head screws with the plastic screw spacers Figure 4 21 ...
Page 61: ...52 7 1 1 Video Settings Figure 7 2 ...
Page 89: ...80 Camera Status Icon On standby Enabled for motion detection and input trigger ...
Page 107: ...98 4 Click Query The filtering results may look like the figure below Figure 7 34 ...