94
[Disk Information]
This section shows the details of the attached storage device.
[Partition Information]
This section shows the partition details of the attached storage device.
To add a memory card:
1.
Insert the memory card to the camera.
2. Click
the
Format
button.
3.
After the format is complete, the partition information will display. The
maximum space for one partition is 200
GB.
To remove a memory card:
1. Click
the
Remove
button.
2.
When you are prompted to ensure the action, click
Yes
. The page will
be refreshed and the partition information will be cleaned.
3.
Remove the memory card from the camera.
Note:
1. If
Enable Recycle
is selected, the available space of the storage
device must be higher than the space you specified at the
Stop
recording or recycle disk when free space of disk is smaller
than x
option. Otherwise no video will be recoded.
2.
The recording data may be lost if you remove the USB mass storage
device during recording.
3.
If you do not remove the storage device properly, the data cannot be
read in another computer. In this case, re-plug the storage device
back to the camera. The system will repair the data automatically.
When the system is repairing the data, the Remove field will display
“Repairing”.
Summary of Contents for GV-BX110D
Page 37: ...28 3 Fasten the philips head screws with the plastic screw spacers Figure 4 21 ...
Page 61: ...52 7 1 1 Video Settings Figure 7 2 ...
Page 89: ...80 Camera Status Icon On standby Enabled for motion detection and input trigger ...
Page 107: ...98 4 Click Query The filtering results may look like the figure below Figure 7 34 ...
