GeoVision GV-AS100, Hardware Installation Manual

Page: 63 / 131

GV-AS200 Controller
53
2
2.2.2 Connecting Inputs
GV-AS200 supports four types of digital inputs for each door:
1. Button inputs, e.g. door opener
2. Sensor inputs, e.g. door status sensor
3. Fire inputs, e.g. fire detector
4. Tamper inputs, e.g. tamper detection sensor
The inputs located at the bottom of the GV-AS200 module are illustrated as shown below.
Input
Button 2
Button 1
Sensor 2
Sensor 2
Input Contact Switch
Input Contact Switch
Figure 2-3
The inputs located at the top right of the GV-AS200 module are illustrated as shown below.
Figure 2-4
The factory defaults of Button inputs and Sensor inputs are set to
wet contact ; the defaults
of Fire inputs and Tamper inputs are set to dry contact .
2.2.2.A Button Inputs
The Button inputs can connect to a door opener device for entry or exit.
By using the “Input Contact Switch” next to the Button inputs, set your Button device to dry
or wet contact. Refer to
Input Contact Switches below.