GeoVision GV-AS100, Hardware Installation Manual

Page: 70 / 131

60
Corresponding Tables between Doors and Card Readers
The following tables show how and where each card reader should be placed based on
different work modes.
Wiegand Card Readers
The default 2-door applications: Door A and Door B
Door A Door B
Work Mode
In Out In Out
One-way control Wiegand A Button inputs Wiegand B Button inputs
Two-way control Wiegand A Wiegand C Wiegand B Wiegand D
Mixed control Wiegand A Button inputs Wiegand B Wiegand D
One-way traffic Wiegand A Non Non Wiegand B
Using an optional Expansion I/O Module to add two additional doors: Door C and Door D:
Door C Door D
Work Mode
In Out
In Out
One-way control Wiegand C Button inputs Wiegnad D Button inputs
Two-way control Non Non Non Non
Mixed control Wiegand C Button inputs Non Non
One-way traffic Wiegand C Non Non Wiegand D
RS-485 Card Readers
The default 2-door applications: Door A and Door B
Door A Door B
Work Mode
In Out In Out
One-way control RS-485 No. 0 Button inputs RS-485 No. 1 Button inputs
Two-way control RS-485 No. 0 RS-485 No. 2 RS-485 No. 1 RS-485 No. 3
Mixed control RS-485 No. 0 Button inputs RS-485 No. 1 RS-485 No. 3
One-way traffic RS-485 No. 0 Non Non RS-485 No. 1
Using an optional Expansion I/O Module to add two additional doors: Door C and Door D
Door C Door D
Work Mode
In Out
In Out
One-way control RS-485 No. 2 Button inputs RS-485 No. 3 Button inputs
Two-way control RS-485 No. 4 RS-485 No. 5 RS-485 No. 6 RS-485 No. 7
Mixed control RS-485 No. 2 Button inputs RS-485 No. 6 RS-485 No. 7
One-way traffic RS-485 No. 2 Non Non RS-485 No. 3
Note: The Work Mode is set by GV-ASKeypad or through network connection when the
Ethernet module is installed.