GeoVision GV-AS100, Hardware Installation Manual

Page: 24 / 131

14
1.3.2.C Resetting the APB Function
You can reset the anti-passback (APB) function of a card to allow a user to re-access the
entry or exit reader.
1. Press the code
＊
227 (
＊
CAR ) .
2. Present the Master Card and enter its PIN code. The LCD displays Add New Card .
3. Press 0 several times. The LCD displays Reset Card’s APB .
4. Press # . The LCD displays Enter Card .
5. You can either press the card number or present the card to the unit.
The LCD displays: Reset, 1. Yes? 2. No? .
6. Press 1 to save and exit.
1.3.3 Accessing the Security Mode
The security mode is used to arm GV-AS100. In the arm mode, no cards can be granted
access and no one can program the unit. Only the security card that is associated with a PIN
code can be used to disarm the unit.
1.3.3.A Enabling the Security Mode
Before you can access the security mode, you need to create a security card first.
1. To create a security card, follow the steps 1 to 4 in 1.3.2.A Adding a Card , select 4)S as
card type and create a PIN code for the security card.
2. To access security mode, press the code
＊
276 (
＊
ARM ) .
The LCD displays Start Arm? Enter PIN Code .
3. Press the PIN code of the security card.
The LCD displays Start Arm? Enter Security Card .
4. Present the security card. The security mode is enabled.
1.3.3.B Disabling the Security Mode
To disable the security mode, press any key, enter the PIN code of the security card and
present the security card.