GeoVision 88-VD37000-0020 Manual Download Page 293

Page: 293 / 331

Pinhole Camera

No.

Name

Description

Lens Receives

images.

Microphone Receives

sounds.

Lens Screw

Loosens to adjust the camera lens.

RJ12 Port

Use the supplied RJ12 cable to connect
the camera lens and main body.

RJ12 Status LED

Turns on (green) when the camera lens
and main body are connected.

PoE

Connects to a PoE adapter.

Status LED

Turns on (green) when the system is
ready.

Memory Card Slot

Inserts a micro SD card (SD/SDHC,
version 2.0, Class 10) to store recording

data.

Default Button

Resets the camera to default settings. See

29. Restoring to Default Settings

in the

Quick Start Guide

259

Summary of Contents for 88-VD37000-0020












































































































































































































































































































































Search results

Summary of Contents for 88-VD37000-0020

Reviews:

Brands by name

Popular brands

GeoVision 88-VD37000-0020, Manual

Search results

Summary of Contents for 88-VD37000-0020

Reviews:

Brands by name

Popular brands