24
5.
Lift the bottom of the float valve
upwards and remove any material
from around it using a damp cloth.
If the material is hard to remove
use a brush or a pin if required.
Clean the steam valve cover to
remove any material.
6.
Pull the cover off of the steam
valve and remove any material
from around the valve locking nut
using a damp cloth. If the material
is hard to remove use a brush,
remove any material from the hole
in the middle of the steam valve
locking nut using a pin if required.
IMPORTANT:
Always replace the
steam valve cover after cleaning
the steam valve locking nut.
7.
Wipe around the top edge of
the pressure cooker with a damp
cloth, using a small brush to
remove any stuck on material.
8.
Removing and refitting the
condensation collector:
Remove
the collector and empty regularly-
this slots into the holder on
the pressure cooker body. The
condensation collector will fit back
into the position.
Brush
Cloth/
sponge
Pin/needle
Brush
Cloth/
sponge
Pin/needle
