4
ASSEMBLING THE MEAT MINCER
Before using, remove all packaging and wash all parts.
(See the “How to Clean” section.)
HOW TO CLEAN
1.Unplug motor housing and remove parts. (Do not immerse motor housing.)
2.Wash all parts except motor housing in hot soapy water. Be very careful when
handling cutting blade.
1. Insert the Feed
Screw into the long
end of the spindle
first.
2. Position the Cutting
Blade onto the Feed Screw
with the flat cutting side
facing you.
3. Place the desired
Cutting Plate on the
Feed Screw over the
Cutting Blade, so that
notches of the plate
fit into the slots of
the grinder tube.
4. Attach the Screw Ring
to the end of the grinder
tube, turning clockwise
until tight.
5. Loosen the Locking
Knob on the side of
the Motor Housing.
Insert the Grinder
Head into the Motor
Housing opening.
Push the head in
until it is firmly
seated in the unit.
6. Secure the Grinder
Head by turning the
Locking Knob until tight.
7. Position the Feeding
Tray on the feeding tube.
