2
Hardware description
1.
Power switch
：
This DVR system has build-in a rechargeable Li-ion battery. On condition that the battery is not
empty, this DVR system operates regularly when the user turns on the power.
2.
Play
：
When the user presses the ‘Play’ key, during the Video-Out mode, system will play the last
record section and send video out through AV-Out.
3.
Record / Manual event record
：
The system records video and coordinates when user presses the ‘Record’ key in Video-out
mode.
4.
Stop
：
The system stops recording when user presses the ‘Stop’ key.
5.
Low power / Charging
：
This is a dual function indicator. The indicator will ON to indicate battery power low when
system power is ON and without an external DC power source. If there is an external power source
connected to the DVR system, the LED indicator will ON during battery charging and OFF when the
battery charging is done.
6.
System health
：
The system fail indicator will ON in three saturations as follow, (1) SD card fail or un-format.
(2)File reading / writing error when video recording or playing. (3)System detects a ‘File error’
within the ‘Playing’ mode.
7.
GPS positioning
：
The indicator blinking while the GPS is in acquisition mode and become always ON after the
GPS fixed.
8.
Recording
：
The description of this indicator was shown below.
States Recording
Indicator
Recording Light
Video playing
Blinking
Real time video output
Blinking
9.
SD card holder
：
When installing a SD card, insert the SD card in to card holder. Please note that do not extract
the SD card directly. When removing the SD card, please push the SD card once, and the card holder
will eject the SD card automatically.
10.
Buzzer
：
The beep sound will output here, please do not inset foreign matter of cover the hole.
11.
Mount hole
：
It is for using this DVR system with a holder in car.
