3
Operating description
This DVR system has three operating mode, Recording mode, Viewing mode and Playing mode. The
operating and switching between different modes is described below.
1.
Record
(1)
Power on
The GPS position fix indicator and recording indicator blinks after power on. Once the
GPS completes positioning, the GPS positioning indicator stop blinking and becomes
always on.
(2)
Start recording
This DVR system enters the Recording mode automatically when the power connected
(The power switch must be placed in the ON position). The recording indicator will always
on when the system is recording videos. The system will not record videos without a SD
card, please confirm that there is a SD card inserted. Once the SD card removed, the system
immediately stop recording and enter Viewing mode.
(3)
Stop Recording
Press the “Stop” key in recording mode, the system will stop recording and enter the
Viewing mode.
(4)
Manual setting event triggers
While the system is in recording mode and it detects the force of three axes via an
accelerator. Once the force variation of any axis that exceeds the threshold value, the
system will note down an issue, records the time information and sets the current recording
section into ‘evt file’. Users can note down an issue manually by pressing the “Record” key
manually.
2.
Recorded video playing
Connect the DVR system to the TV or monitor which has the function of AV input via AV cable.
The AV cable should have a 3.5mm stereo plug in one side and two RCA male plugs in the other side.
User can presses the “Play” key and the system will load last two video record sessions into the
buffer and wait for the user to press “Play” again. Then the system outputs the video.
