Geonav 7 Wide User And Installation Manual Download Page 6

Page: 6 / 92

English

•

Protection against:

Reverse polarity

Input overvoltage

•

Operating temperature: -10°C to +60°C

•

Storage temperature: -20°C to +70°C

Memory characteristics

•

Up to 100 waypoints per route

•

Up to 5000 trackpoints (multiple tracks)

•

Up to 3000 markers per group

•

Number of routes, tracks and markers: unlimited, depend-
ing on the size of the CompactFlash™ utilised

Interface characteristics

•

Standard NMEA 0183 sentences
-

from position sensor:
GLL, VTG, GGA, RMC, GSV, ZDA, RMA, GSA, GNS,

DTM
-

from depth sounder:
DBT, MTW

to autopilot:
APA, APB, XTE, RMB, BWC, GLL, VTG

If received from the GPS, the following sentences are trans-
mitted: GGA, RMC, ZDA.

Accessories

•

Bracket for detachable installation

•

Cradle for flush mounting (optional)

•

Fishfinder unit (optional)

•

Power supply cable

•

User and Installation Guide

•

Protection cap

Characteristics

Summary of Contents for 7 Wide





























































































Search results

Summary of Contents for 7 Wide

Reviews:

Related manuals for 7 Wide

Brands by name

Popular brands

Geonav 7 Wide, User And Installation Manual

Search results

Summary of Contents for 7 Wide

Reviews:

Related manuals for 7 Wide

Brands by name

Popular brands