Geonav 7 Wide User And Installation Manual Download Page 64

Page: 64 / 92

English

Route

The arrival time at the waypoint and the fuel consumption
will be displayed provided that estimated speed and fuel con-
sumption values have been inserted previously (see the

Enter-

ing speed and fuel consumption data

Section).

To move within the page, use the joystick. To go back to the
menu, use the joystick; to exit, press the

EXIT

key.

Entering speed and fuel consumption data

The data are used to calculate the values displayed in the
ROUTE window.

Press the

GOTO

key to display the menu and select ROUTE.

Move the joystick to the end of the waypoint list and then
further downward to access speed and fuel consumption data.
Press

ENTER

to enter data, then confirm the operation.

Storing a route in the CompactFlash™

Press the

GOTO

key to display the menu, select ROUTE, SAVE

ALL and press

ENTER.

To change the default name, use the

joystick. To confirm the operation, press

ENTER.

A message will confirm that the route has been stored cor-

Summary of Contents for 7 Wide





























































































Search results

Summary of Contents for 7 Wide

Reviews:

Related manuals for 7 Wide

Brands by name

Popular brands

Geonav 7 Wide, User And Installation Manual

Search results

Summary of Contents for 7 Wide

Reviews:

Related manuals for 7 Wide

Brands by name

Popular brands