Geonav 7 Wide User And Installation Manual Download Page 4 | Manualshive

Page: 4 / 92

background image

4

English

INTRODUCTION

The GEONAV is a chart plotter that can be interfaced with a
GPS receiver, fishfinder unit, autopilot and other onboard in-
struments, and allows displaying the boat’s geographical po-
sition with respect to an electronic chart. Thanks to the
GEONAV and a NAVIONICS Platinum™ or Gold™ electronic
chart, you will never get lost even in case of fog, bad weather
or dark.

The GEONAV has been designed to allow flush mounting.
Equipped with an easy-to-use keyboard, the GEONAV allows
controlling the autopilot directly from the plotter (Easy Pilot
function) and, thanks to the unlimited capacity of the
CompactFlash™ cartridges - that can also be used on PCs as
personal hard disks - can store a large amount of route, track
and marker data.
The GEONAV is ready for connection with the fishfinder black-
box unit (available as an option) thus becoming a complete
fishfinder instrument, thanks to the dedicated windows au-
tomatically enabled when the unit is present.

The Route functions will allow you to plan a trip, while, thanks
to the new multimedia NAVIONICS Platinum™ electronic
charts, you will always know exactly the boat’s position.
NAVIONICS Platinum™ charts provide a detailed coverage of
all the most popular boating areas, offer new functions - such
as 3D display, satellite photographs, etc. - and can be used in
addition to official paper charts to obtain additional informa-
tion such as the availability of port services, as well as tides
and currents data. NAVIONICS Platinum™ or Gold™ electronic
charts are available worldwide from authorized NAVIONICS
dealers.

When new functions are available, it will be possible to up-
date the GEONAV internal software at any GEONAV dealer.

Introduction

«
...
2
3
4
5
6
...
»

Summary of Contents for 7 Wide





























































































Reviews:

No comments

Related manuals for 7 Wide

Brand: H&S Pages: 54

Brand: Samson Pages: 2

Brand: ABB Pages: 4

Brand: EuroLite Pages: 2

Brand: Phenix Technologies Pages: 39

Brand: Triton Pages: 31

Brand: MadLab Pages: 7

Carestation 620

Brand: GE Pages: 268

Brand: GE Pages: 50

Brand: Griven Pages: 36

Portable Vocal Booth Pro Studio Series

Brand: EditorsKeys Pages: 2

Calculite C6P38MHA

Brand: Lightolier Pages: 2

TRAKTOR KONTROL S3

Brand: Native Instruments Pages: 39

Brand: K-SPORT Pages: 4

Brand: Baldan Pages: 72

Brand: Avicenum Pages: 32

Brand: Renegade Labs Pages: 114

Brand: SATA Pages: 294

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands