Safety Directions
Zone20 H
| 7
1.6
Laser Classification
1.6.1
General
General
The following chapters provide instructions and training information about laser safety according to inter-
national standard IEC 60825-1 (2014-05) and technical report IEC TR 60825-14 (2004-02). The informa-
tion enables the person responsible for the product and the person who actually uses the equipment, to
anticipate and avoid operational hazards.
1.6.2
Zone20 H
General
The rotating laser built into the product produces a visible laser beam which emerges from the rotating
head.
The laser product described in this section is classified as laser class
1 in accordance with:
•
IEC 60825-1 (2014-05): "Safety of laser products"
These products are safe for momentary exposures but can be hazardous for deliberate staring into the
beam. The beam may cause dazzle, flash-blindness and after-images, particularly under low ambient light
conditions.
Zone20 H:
Labelling
a) Laser beam
According to IEC
TR
60825-14 (2004-02), products classified as laser class
1, class
2 and class
3R
do not require:
•
laser safety officer involvement,
•
protective clothes and eyewear,
•
special warning signs in the laser working area
if used and operated as defined in this User Manual due to the low eye hazard level.
National laws and local regulations could impose more stringent instructions for the safe use of
lasers than IEC
60825-1 (2014-05) and IEC
TR
60825-14 (2004-02).
Description
Value
Maximum average radiant output power
2.6
mW
Pulse duration (effective)
1.1
ms
Pulse repetition frequency
10 Hz
Beam divergence
0.2 mrad
Wavelength
635
nm
011245_001
a
a
Summary of Contents for ZONE20 H
Page 1: ...GeoMax Zone20 H User Manual Version 1 0 English ...
Page 29: ......