Genvex Optima 310 DESIGN, User Manual

Page: 10 / 28

10
Optima 310
Item 3: Electric cartridge ON/OFF
By configuring the set-point to ON, the electric cartridge
will engage as required. If the set-point is set to OFF, the
electric cartridge will not engage, even if required. When
the fresh air temperature is below 0°C, it is recommended
that the electric cartridge to supplement the service water
heating and thereby reduce the heating time.
The default setting is OFF
Item 4: Timer levels 3 and 4
At speeds 3 and 4, the device will automatically
reconnect to speed 2 after the number of hours that are
configured in item 17 by configuring the set-point to ON:
If the set-point is set to OFF, the device will run at speed
3 or 4 until it is manually changed to another speed. The
timer can also be operated directly with the button with
the symbol for extended operation on the display for daily
operating options.
Item 5: Change filter
There is a built-in filter timer that counts how long the
device has been running since the last change of filter.
The set point can be configured from 1- 6, which
corresponds to 1-6 months.
It is recommended that the set-point should initially be set
at 3, corresponding to 3 months.
If the filters are too dirty after the period configured,
configure the set-point to a lower number.
If is not necessary to change the filter after the configured
period, the set-point can be configured to a larger
number.
When the timer reaches the configured value for the
change of filter, “Alarm” and “Change filter” will be flash at
the top of the screen saver.
When the filters have been changed, return to the screen
display for daily operating options and hold down the
button for the filter symbol until the exclamation sign
disappears and the device returns to normal operation.
Display
This function can be used to configure and change the
following sub-items:
Language
This function can be used to choose between the
languages Danish, German, English and French.
Programme info
This function can be used to configure and change how
the information about the program is displayed. It displays
the version of the software used.
Screen saver
This function can be used to configure and change how
the screen saver is displayed.
Interval
This function can be used to configure and change how
long the interval should be.
Auto wake-up
This function can be used to configure and change when
the auto wake-up starts.
Auto brightness
This function can be used to configure and change how
the automatic brightness should be.
Bright day
This function can be used to configure and change how
much light there should be on the display during daytime.
Bright night
This function can be used to configure and change how
much light there should be on the display during the night
time.
Light day pause
This function can be used to configure and change how
long the break should be for light in the display during the
daytime.
Light night pause
This function can be used to configure and change how
long the break should be for light in the display during the
night-time.
Default reset
Use this function to return all settings to the factory
default.