Rear Panel Connections
1. Power - The power module accommodates an AC voltage input of
100–240VAC, 50/60Hz, 30W. No switching is required.
2. Inputs 1-8 - For mic- and/or line-level inputs.
3. RS-485 Remote Control Ports - These four-pin Phoenix™ ports allow
you to control the XAP 800 with a Gentner Control Panel.
4. Control/Status Ports A and B - These DB25 connectors are for
connecting custom control devices. The control devices have access to
the command set for the XAP 800 and can be used for functions such
as volume, muting, preset change, room combining, etc. Devices can
be connected to either port.
Figure 3. XAP 800 Rear Panel
Connections
1
2
3
4
5
6
7
8
9
TECHNICAL SUPPORT:
1.800.283.5936 (USA) OR 1.801.974.3760
PRODUCT DESCRIPTION •
FRONT PANEL
6
Figure 2. XAP 800 Front Panel
1. LCD - Used for numeric display of audio levels, gain readouts, and
limited set-up and programming functions.
2. Enter/
▲▼
/ESC - Used to navigate the XAP 800’s menu system.
3. LED Meter - This LED bar meter is used to display the audio level of
an input, output, or processing channel of the XAP 800.
4. Meter - Takes you directly to the Meter branch of the XAP 800’s LCD
programming tree.
5. Mic On LED - These LEDs indicate microphone gate status.
1
2
3 4
5
Summary of Contents for XAP 800
Page 1: ...XAP 800 White Paper ...
Page 67: ......
