Gentner XAP 800 Service Manual Download | Manualshive

Page: 35 / 67

background image

TECHNICAL SUPPORT:

1.800.283.5936 (USA) OR 1.801.974.3760

APPLICATIONS •

COURTROOM

34

Courtroom Application

A courtroom application requires that the sound system be precisely calibrated so that all voice
audio—including that from the judge, legal counsel, witnesses, and the jury—is easy to understand.
The XAP 800 includes many features which enhance the performance of any courtroom audio
system.

A typical courtroom setting requires at least six microphone inputs and eight line outputs. The
XAP 800 features eight microphone inputs, each with individual gain, parametric equalizer, automatic
gain control, high/low-pass filters and more. This allows you to provide everyone in the courtroom a
natural and clear listening experience.

Gentner’s XAP TH1 is easily integrated into the courtroom system, allowing participants from a phone
line to be heard clearly throughout the courtroom.This is an ideal addition to the system because it
allows people to appear in the court telephonically—reducing travel expenses and wasted time.

The APV200-IP Video Codec integrates perfectly into the XAP 800 conferencing system. This allows
you to videoconference between courtrooms and jails to reduce transport costs and maintain security.

During courtroom sessions, judges might want to hold sidebar conversations with counsel. To prevent
jurors from hearing these conversations, white noise masking can be sent out of the jurors’ speakers.

Everything that transpires in the courtroom must be recorded. You can configure the XAP 800 to
accommodate this requirement by routing all outputs to the court recorder–without gating.

Screen

Bench

Judge

Mic/Speaker

Witness

Mic/Speaker

Jury/Podium
Mic/Speaker

Ceiling

Speakers

Plaintiff

Mic/Speaker

Lapel Mics

Lapel Mics

Defendant

Mic/Speaker

Ceiling Speakers

Ceiling Speakers

Gallery

Rear Projector

Clerk

Mic/Speaker

Figure 22.

Courtroom

«
...
33
34
35
36
37
...
»

Summary of Contents for XAP 800




































































Reviews:

No comments

Related manuals for XAP 800

Brand: Rain Bird Pages: 48

Brand: Dahua Pages: 58

sensoCOMFORT VRC 720/3

Brand: Vaillant Pages: 64

Brand: Sandstrom Pages: 32

Brand: V-ZUG Pages: 24

Brand: ENTRYPASS Pages: 27

Studio 500 Series

Brand: JAMO Pages: 16

Brand: Bame Pages: 12

Brand: MOBILUS Pages: 14

Brand: J-Tech Digital Pages: 18

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 31

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands