Gentner XAP 800 Service Manual Download Page 50 | Manualshive

Page: 50 / 67

background image

TECHNICAL SUPPORT:

1.800.283.5936 (USA) OR 1.801.974.3760

PROGRAMMING •

FRONT PANEL

49

Using G-Ware software on a connected PC is the only method for
programming all the features of the XAP 800, but a few parameters can
also be adjusted through the front panel buttons and displays. The front
panel consists of an LCD display, five parameter adjustment buttons, an
LED VU meter, and eight mic LEDs.

To protect from unauthorized changes, the XAP 800 is pass-coded.
Navigation of the menus is allowed without a password; however,
changes to programming require a valid password.

The five parameter adjustment keys consist of

▲

,

▼

, Enter, Esc

(Escape), and Meter buttons. The first four keys (

▲

,

▼

, Enter, and Esc)

are used for menu navigation and parameter selection. The Meter
button determines what audio is selected on the front panel LED VU
meter. In addition, numeric audio levels are displayed on the LCD panel.

Menu Structure

System - This menu is used to access presets 1-32 and set security
parameters and the master/slave configuration. Also, the System menu
is used for viewing the device ID number, unit ID number, and software
version information.

RS-232 - This menu is used to configure baud rate and flow control
through the RS-232 port. It is also used to enable the modem and clear
passwords.

Meter - The Meter menu lets you select which audio source is displayed
on the LED meter, including any input or output. You can set the meter
to display speaker-to-mic room loss for any input 1-8. Also, you can set it
to display a default input, output, or room loss level.

The eight Mic On LEDs indicate the gate status of a mic channel. If an
LED is on, it indicates that the respective mic is gated on.

Gentner recommends that you use G-Ware PC software (described on
the previous page) to program these parameters of the XAP 800.

Front Panel

«
...
48
49
50
51
52
...
»

Summary of Contents for XAP 800




































































Reviews:

No comments

Related manuals for XAP 800

Brand: Hyundai Pages: 26

CIRFLEXX UMS 4100

Brand: Grundig Pages: 38

Brand: ATEN Pages: 176

Room System SRS-Lync-XL

Brand: SMART Pages: 2

Brand: Aiwa Pages: 76

Brand: FONESTAR Pages: 24

Brand: Steg Pages: 9

Brand: Teac Pages: 23

Stealthbox SB-HY-VELOSTR/10TW3

Brand: JL Audio Pages: 7

Brand: Elenberg Pages: 36

Brand: Lenze Pages: 76

Brand: BFT Pages: 8

Brand: Raven Pages: 59

E84DGFCR Series

Brand: Lenze Pages: 93

Brand: RCA Pages: 26

Brand: Fantech Pages: 2

Brand: Fancom Pages: 51

Brand: Renegade Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands