PROCESS DESCRIPTION
Gentherm Global Power Technologies
Page 16
4.1.7
Optional TEG Mounting Stands (Pole or Bench Type)
The Pole Stand consists of a 76-inch-long piece of 3-inch
diameter pipe with an “H” shaped
bracket welded to one end which the TEG can be firmly attached to using 1/4 in. fasteners
(not included). The Bench Stand consists of 3 in. by 3 in. and 2 in. by 2 in. aluminum angle
sections that are assembled together to provide a sturdy structure to support the TEG.
4.2
CONVERTER LIMITER
A Converter/Limiter (C/L) is available for use with the model P-5100 TEG. It is intended for
use with a model P-5050, or P-5100 TEG requiring either 12 or 24 V DC nominal output. It
consists of two separate circuits operating together. The first is a DC/DC Converter that
converts the input to 12 or 24V. The second circuit is a Regulating Voltage Limiter that
regulates the voltage to a user selectable voltage. It includes overload, short circuit, two
voltage sensing alarm relays and temperature compensation.
Figure 7 - C/L General Assembly
Regulating (Voltage) Limiter:
A voltage limiting circuit is incorporated into the C/L, which
regulates the Output voltage and provides a protective load for the power unit.
Voltage Converter:
The voltage converter switches the input voltage to another level suit-
able for the load. Nominal 12 or 24 V settings can be selected, and the exact output voltage
can be fine-tuned.
Summary of Contents for P-5100
Page 4: ......
