13
www.gentecaustralia.com.au
Knee Valve Installation
1.
Place the flat brass nipple spacer on
the spring.
Ensure the nipple is facing
towards the knee valve wand
2.
Slide the head valve holder over the knee
valve wand and screw on to the cartridge.
Mounting the knee valve to the wall:
3.
Screw on the knee valve body to the
flange.
4.
Use the 2 holes on the flange to mount
the knee valve to the wall.
5.
Screw the flange and knee valve into
place using the necessary screws to
mount firmly onto the wall.
Ensure
the arrow
on the knee valve
body
figure (2)
is facing up when
connected to the water inlet and
outlet
6.
Place the filter in the water inlet and
use flat union connectors to prevent
damaging the strainer.
7.
Do not over-tighten the cartridge.
Important Information
Ensure the brass nipple spacer (
figure
1)
is fitted securely facing the right
side to prevent any leaking
Product should be mounted free of
obstructions.
Do not modify the product.
Figure 1
Figure 2
*Regular service must be carried out on the product to avoid product failure.
KNEE OPERATED VALVE
TFT3500, TFT3500KIT
