Genquip Gi1000, Owner'S Manual

Page: 16 / 27

page 16 Genquip Gi1000 Digital Inverter Petrol Generator
Activity/Procedure
If you do this ...
Potential Hazards
This could happen ...
Risk Corrective Action
You can prevent by ...
Operating generator in
unventilated or enclosed
area.
Generator may over heat.
Carbon Monoxide (CO)
poisoning from the toxic
engine exhaust.
2
1 Operate generator in a well-
ventilated area. Do not operate
in an enclosed location.
Operate the generator in a
careless/reckless manner.
Unsafe operation could
lead to serious injUry to
you & others.
2 Review and understand all
the operating instructions
and warnings supplied by
manufacture
Refueling the generator
while engine IS running.
Petrol vapors are highly
flammable & could cause
a fire or explosion, which
can cause serious injury.
2 Always shut down engine
and allow engine to cool
sufficiently. Open fuel
cap slowly and have an
appropriate fire extinguisher
present.
Over filling with fuel or fuel
spillage while refueling.
Fuel that is spilled whilst
refueling can cause fire or
explosion.
2 Open fuel cap slowly. Do
not over fill fuel tank. If fuel
spillage has occurred during
refueling, clean the spillage
completely and allow sufficient
time for any fuel vapors to
dissipate.
Tampering with the
factory preset engine
settings.
Generator could over heat
and engine could over
speed, which may result
in a fire causing injury.
2 Never attempt to tamper with
factory settings, if in doubt
contact Genquip.
Failure to use the
generator grounding point
and correctly ground the
generator.
Generator unit could
become electrically
charged and could cause
electrocution.
1 Make sure the generator
is connected /grounded
correctly.
Exceeding the load
capacity of the generator
by attaching to many
items, or items with very
high load ratings.
Could overheat some
items or their attached
wiring causing fire or
electrical shock.
1
2 Understand load ratings.
Make sure that the total
of electrical loads for all
attachments does not
exceed the load rating of the
generator. Refer to a licensed
electrician if in doubt.
Operating generator
with guards or protective
covers removed.
Exposed moving parts
and hot surfaces could
cause injury.
2 Never operate the generator
without the factory fitted
guards or protective covers.