Genquip Gi1000, Owner'S Manual

Page: 14 / 27

page 14 Genquip Gi1000 Digital Inverter Petrol Generator
Genquip Safety
“Genquip values your safety and the safety of others
when using your Genquip generator”
General safety
It is important to read and understand your owner’s manual before operating your Genquip
generator.
Safety tips for safe operation
• Know where the controls are and how they operate, for the startup and shut off
procedure.
• Know the location of the fuel shutoff and how it operates.
• Genquip generators must always be used in a well ventilated area.
• Your Genquip generator is not weatherproof.
• To prevent electrical shock, make sure your generator is properly grounded.
• Operate the generator on a level surface.
• Never refuel your Genquip generator whilst the engine is running.
• Always allow sufficient time for the generator to cool down before refueling.
• Always refuel the generator in a well-ventilated area.
• Keep all flammable materials and fuel away from the operating generator.
• Caution of the hot exhaust must be observed as a generator can easily start a fire;
always locates your generator where its exhaust will vent safely.
• Avoid getting burned. Many generator parts radiate heat that is sufficient to burn you
during operation.
• Only a licensed electrician should hard wire your Genquip generator.
• Turn off all equipment powered by the generator before shutting down your generator.
• Never over load your Genquip Generator, if unsure about the power requirements
consult a licensed electrician.
• Generators can be noisy, so when working around the generator it may be advisable to
wear appropriate ear protection.
• Keep children away from your Genquip generator at all times.
• Never permit anyone to operate a Genquip generator without proper instructions.
DANGER:
Only competent and qualified electricians should
connect wiring to this equipment; all connections must
comply with all applicable Australian Standards and
electrical codes.