10
ENGLISH
Fig. 14
2) Loosen the two screws (Fig.14 ref.
A
), axially shift the
closing limit-switch to the required position and re-tighten
the two screws.
3) Loosen the two screws (Fig.14 ref.
B
), axially shift the
opening limit-switch to the required position and re-tighten
the two screws.
4) Run a couple of test cycles to check if the limit-switches
are correctly positioned. If the limit-switches have to be
adjusted again, resume from point 2.
5) Re-fit the lower housing.
12.MAINTENANCE
To ensure correct long-term operation, we advise you to
carry out the following checks every six months:
1) Check if all the safety devices in use are connected and
efficient.
2) Check if the anti-crushing clutch is correctly set.
3) Check the condition and efficiency of the earth
connection.
4) Check if all screws are tight.
5) Check wear and lubrication of the hinges.
13.REPAIRS
For any repairs, contact the authorised Repair Centres.
Summary of Contents for Skill 01
Page 1: ...Skill 01 ...
