Genius INTERMODO4 868, Manual

Page: 5 / 20

5
ENGLISH
INTERMODO4 868
1. DESCRIPTION
The INTERMODO4 control board is a four-channel external receiver, which has an integrated decoding system. When a
channel is activated by radio control, the relevant N.O relay contact closes by the methods described in chapter 5.
The selectable configurations are:
CH1= pulsed N.O. relay output
CH2= pulsed/fixed N.O relay output (selectable by DS1)
CH3= pulsed N.O. relay output
CH4= timed N.O. relay output (can be adjusted with SW5)
2. TECHNICAL SPECIFICATIONS
MODEL INTERMODO4 868
POWER SUPPLY (V) 12/24 ac-dc
RECEPTION FREQUENCY (MHz) 868.35±0.2
ABSORBED CURRENT (mA)
100 mA
SAVEABLE CODES 250 CH1-2 / 250 CH 3-4
NUMBER OF CHANNELS 4
NUMBER OF RELAY OUTPUTS (N.O.)
N 2 pulsed (CH 1-3)
N 1 pulsed/fixed (selectable) (CH2)
N 1 timed (CH4)
RELAY CONTACTS CAPACITY 0.5 A / 120 VA
PROTECTION CLASS
IP 44
OPERATING AMBIENT TEMPERATURE (°C) -20 / +55
EXCLUSIVE USE gate opener
This product complies with Directive 99/05/EEC
Product notified in all E.C. countries
Fig. 1 Fig. 1
Preperforated facility for cable grippers (Ø16.5)
Cover
Facility for securing on DIN guide
Fittings for screw securing
Terminals for command output (N.O.)
Normally open (N.O.) relay contact
Signalling LEDs ( ON= OUTPUT ACTIVE )
DL1=LED CH 1 DL2=LED CH2
DL3=LED CH3 DL4=LED CH4
Radio programming push-buttons
SW1=PUSH-BUTTON CH1 SW2=PUSH-BUTTON CH2
SW3=PUSH-BUTTON CH3 SW4=PUSH-BUTTON CH4
DL6: LED signalling time programming CH4
SW5: Time programming push-button CH4
Selection dip-switch
Power supply terminal
Terminal for antenna
DL5: Mains ON LED ( ON=MAINS PRESENT )
Preperforated facility for cable grippers (Ø16.5)
Cover
Facility for securing on DIN guide
Fittings for screw securing
Terminals for command output (N.O.)
Normally open (N.O.) relay contact
Signalling LEDs ( ON= OUTPUT ACTIVE )
DL1=LED CH 1 DL2=LED CH2
DL3=LED CH3 DL4=LED CH4
Radio programming push-buttons
SW1=PUSH-BUTTON CH1 SW2=PUSH-BUTTON CH2
SW3=PUSH-BUTTON CH3 SW4=PUSH-BUTTON CH4
DL6: LED signalling time programming CH4
SW5: Time programming push-button CH4
Selection dip-switch
Power supply terminal
Terminal for antenna
DL5: Mains ON LED ( ON=MAINS PRESENT )
DS1 ON OFF
DIP SWITCH 1
CHANNEL 2 FIXED
OUTPUT
CHANNEL 2 PUL-
SED OUTPUT
DIP SWITCH 2
CHANNEL 4 TIME
BASE 1 SECOND
SELECTION (SEE
CHAP. 6)
CHANNEL 4 TIME
BASE 30 SECONDS
SELECTION (SEE
CHAP.6)
DS1 ON OFF
DIP SWITCH 1
CHANNEL 2 FIXED
OUTPUT
CHANNEL 2 PUL-
SED OUTPUT
DIP SWITCH 2
CHANNEL 4 TIME
BASE 1 SECOND
SELECTION (SEE
CHAP. 6)
CHANNEL 4 TIME
BASE 30 SECONDS
SELECTION (SEE
CHAP.6)
SLOW FLASHING
DL6
30 SECS. TIME BASE SELECTED
AND OUTPUT ACTIVE
FAST FLASHING
DL6
1 SEC. TIME BASE SELECTED AND
OUTPUT ACTIVE
SLOW FLASHING
DL6
30 SECS. TIME BASE SELECTED
AND OUTPUT ACTIVE
FAST FLASHING
DL6
1 SEC. TIME BASE SELECTED AND
OUTPUT ACTIVE