ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
32
Genius Car Alarms
www.alarmasgenius.com
10
Activated Anti-hijacking
As soon as the system enters the anti-hijacking vehicle lights give 2 flashes, if function 13 is
activated, the siren will emit 2 beeps, LED will start flashing slowly, after 30 seconds the lights
begin to flash and the intermittent siren sounded, after 15 seconds after they started flashing siren
sound if function 14 is ON, ignition cut intermittently producing an engine failure, after 15 seconds
will activate the power failure constant turning off the vehicle engine and lock the doors, the siren
sounds constant.
Cancels / Disables Anti-hijacking
To cancel the anti-hijacking before it starts to sound the siren tones or 6 before 60 seconds, press
and release the reset button 1 time.
To disable anti-hijacking after starting the siren 6 tones or after 60 seconds, hold or pass the ignition
ON, press the reset button the number of times the security code (factory is 1) and wait 3 seconds
timeout confirmation that the code entered is correct
Programming functions
For selection of programming functions, please follow the steps
a. In disarm mode, pass the ignition ON to OFF
b. Within 10 seconds after passing the ignition OFF, press the valet button 5 times, the siren
emits a long sound and light vehicle light fixed. The system enters the programming
function.
c. Within the first 10 seconds, press the valet times equal to the number of the function you
want to program, the siren will chirp each time you press the valet button.
d. When you reach the desired function, press button 1 or 2 button Remote Control to select.
Also you could make the selection locking or unlocking the door button (Manual). The siren
will sound once with button 1 or closure, the siren will beep twice with the 2 button or open.
e. To program another funtcion on the menu press the valet button again the number of times
of the next function to be programmed. For example: We want to program the automatic
arming with door lock function (Function 2), press the valet button 2 times, press and
release the button 1 on the remote control or close the locks with swiche door, Deseamos
programar la función Armado Automático con cierre de puertas (Función 2), presionamos
el botón valet 2 veces, presionamos y soltamos el botón 1 del control remoto o cerramos
los seguros eléctricos con el swiche de la puerta, now we want to set the Anti - assault
ignition function (Function 10), press the valet button 8 times, press and release the button
1 on the remote control or close the locks with swiche door.
f. If no action is taken within 10 seconds or turn the ignition to the OFF position, the system
will give a long beep and exit the selection mode functions.
FUNCTION TABLE
NO.
FUNCTION
CLOSE
BUTTON
OPEN BUTTON
1
Automatic Arming
YES
NO
2.
Close insurance with Automatic Arming
YES
NO
3.
Close insurance by ignition
YES
TREAD BRAKE
4.
Open and close insurance by ignition
YES
NO
5
Automatic Re-Arming
YES
NO
6.
Acoustic warning to Arm and Disarm
YES
NO
7
Exclusion of false alarm
YES
NO
8
Anti hijack by remote control
YES
NO
9
Delay line pushbuttons (Dome Ligth)
YES
NO
10
Anti hijack by ignition
YES
NO
11
3rd channel
PULSE
30 sec pulse
rise to
