Genie Super Tower, Service Manual

Page: 16 / 45

Service Manual September 2016
Maintenance Inspection Report
8 Super Tower Part No. 115411
Maint enanc e I ns pection R eport
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
•
Make copies of this report to use for
each inspection.
•
Select the appropriate checklist(s) for
the type of inspection(s) to perform.
Daily or every 8 hours A
Quarterly or every
250 hours
A + B
Annually or every
1000 hours
A + B + C
•
Place a check in the appropriate box
after each inspection procedure is
completed.
•
Use the step-by-step procedures in
this section to learn how to perform
these inspections.
•
If any inspection receives an "N," tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Checklist A- Rev A
Y N R
A-1 Inspect the manuals
and decals
A-2 Pre-operation
inspection
A-3 Function tests
Checklist B
Y N R
B-1 Welds
B-2 Clean columns
B-3 Winch operation
B-4 Carriage hold down
bar
B-5 Inspect and lubricate
winch
Comments
Checklist C- Rev A
Y N R
C-1 Mast assembly wear
C-2 Safety brake system
(if equipped)
C-3 Replace winch friction
disk
C-4 Inspect cable and
pulleys
C-5 Lubricate the casters
and wheels
C-6 Painted surfaces
Comments