Genie Quietlift 2M, Operation And Maintenance Manual

Page: 18 / 18

16
PartsList
Item Part Name
Number
Included
2F Bolt, 5/16"-18 x 1" 6
2G Locknut, 5/16"-18 6
2K ClevisPin, 1-3/8" 1
2L ClevisPin, 1-1/8" 1
2M Self Tappers 4
3A Safety Beam Bracket (not shown) 4
3B Safety Beam Transmitter (not shown) 1
3C Safety Beam Receiver (not shown) 1
3D Wire, 22 AWG, 2-cond. (not shown) 90 ft.
3 E Wire Clip 5
3 F Flange Bolt, 1/4"-20 x 1/2" 2
3G Lag Screw, 1/4" x 1-1/4" 4
3H Locknut, 1/4"-20 2
3 J Insulated Staples 20
4A CarriageRelease Handle 1
4B Release HandleRope 36"
4C Wall Control (not shown) 1
PartsList
Item Part Name
Number
Included
4D MachineScrew, 6-32 x 1" 2
4E Wood Screw, #6 x 1" 2
4F Screw Cover 2
4G 3-Button Remote Control 2
4H WirelessKeypad 1
4J Screw Anchor 2
4K Wood Screw, #6 x 1-1/2" 2
4L Screw Cover 2
5A Straight Door Arm 1
5B Curved Door Arm 1
6 Motor Head 1
7 Rail Assembly (3 sections) 1
8 Belt 1
9 Rail Clamps 2
10 Mounting Strap 2
11 Emergency Release Tag 1
F
LASHING
L
IGHT
T
ROUBLE
C
ODES
Power Head System Status
NUMBEROFFLASHES PROBLEM CAUSE REMEDY
2 FLASHES Door
won’t close
Shorted wall
control wire
Check wall control wires.Be sure both are connected to
terminal screws.Check for a staple in the wires.
Remove anystaplescompressing the wire.
3 FLASHES Door
won’t close
Safe-T-Beam®obstacle Check for obstacles. Align theSafe-T-Beam®
4 FLASHES Door reversesor
won’t open or
close
Open or close force exceeded, or motor
exceeded, or motor thermal shutdown
Check for bindingor unbalanced door. Adjust
the door force. If the motor had thermal
shutdown, wait 30 minutes and retry.
5 FLASHES
Door
won’t open
with remote
Remote control was activatedwhile
vacationswitch was locked
Unlock the vacationswitch onthe wall control
(optional accessory)
6 FLASHES Motor ran longer
than 30 seconds
Mechanical or
electronic failure
Call Customer Service 800-354-
3643
P
ARTS
I
DENTIFICATION
F
ULL
A
SSEMBLY
M
PartsList
Item Part Name
Number
Included
1A Pulley Assembly 1
1B Carriage 1
1C Carriage Bolt, 1/4"-20 x 3/4" 8
1D Locknut, 1/4"-20 9
1E Flange Bolt, 1/4"-20 x 1/2" 1
1F Tapered Flange Bolt, 1/4"-20 x 3/4" 4
1G Bolt, 5/16"-18 x 3/4" 2
1H Locknut, 5/16"-18 2
1J Sprocket 1
1K Sprocket Holder 1
1L Belt Clamp 1
1M Grease,Tube 1
2A Header Bracket 1
2B Door Bracket 1
2C Lag Screw, 5/16" x 2" 4
2D ClevisPin, 2-3/8" 1
2E Cotter Pin 3