Operator's Manual
Second Edition • Second Printing
Maintenance
52
GS
™
-2669DC • GS
™
-3369DC • GS
™
-4069DC
Part No. 1278002GT
Maint enanc e
Observe and Obey:
Only routine maintenance items specified in
this manual shall be performed by the operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer’s specifications
and the requirements specified in the
responsibilities manual.
Dispose of material in accordance with
governmental regulations.
Use only Genie approved replacement parts.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appear at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1
Be sure that the platform in the stowed
position.
2
Visually inspect the sight gauge located on the
side of the hydraulic oil tank.
Result: The hydraulic oil level should be within
the top 5 cm of the sight gauge.
3
Add oil as needed. Do not overfill.
Hydraulic oil specifications
Hydraulic oil type
Chevron Rando HD equivalent
Summary of Contents for GS-2669DC
Page 59: ......
