Genie GS-2669DC, Operator'S Manual

Page: 47 / 59

Second Edition • Second Printing Operator's Manual
Operating Instructions
Part No. 1278002GT GS
™
-2669DC • GS
™
-3369DC • GS
™
-4069DC 45
To reset thermal limit cutout
If the platform controls LED readout displays fault
codes F053, F054, F055 or F056, the machine has
overheated. The fault condition must be repaired
or removed before resuming machine operation.
1 Push in the red Emergency Stop button to the
off position.
2 Allow the machine to cool for approximately
5 minutes before resuming machine operation.
3 Pull out the red Emergency Stop button to the
on position.
Operation from Ground with
Controller
Maintain safe distances between the operator,
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
Battery Level Indicator
Use the LED diagnostic readout to determine the
battery level.
Note: When a blinking LO code appears on the
platform controls LED display, the machine must
be taken out of service and charged, otherwise all
machine functions will be disabled.
Full Charge
Half Charge
Low Charge
LO Flashing