Genie GS-2668 RT, Service Manual

Page: 36 / 184

Section 3 • Scheduled Maintenance Procedures
REV B
November 2008
3 - 10 GS-2668 RT • GS-3268 RT Part No. 112657
6 Inspect the air filter element. If needed, blow
from the inside out using low pressure dry
compressed air, or carefully tap out dust.
7 Securely install the filter element into the
canister.
8 Install the gasket and baffle (if equipped), and
end cap onto the air cleaner canister.
Note: Be sure the dust discharge valve is facing
down when installed.
9 Secure the end cap to the air cleaner cannister
with the retaining clamps.
10 Kubota D1105 and D905 models: Swing the
engine pivot tray back to its original position
and make sure the engine tray locking pin locks
into place.
CHECKLIST A PROCEDURES
A-6
Perform 30 Day Service
The 30 day maintenance procedure is a one-time
sequence of procedures to be performed after the
first 30 days or 40 hours of usage. After this
interval, refer to the maintenance checklists for
continued scheduled maintenance.
1 Perform the following maintenance procedures:
Kubota models:
· B-3 Inspect the Tires, Wheels and
Lug Nut Torque
· D-2 Replace the Hydraulic Tank
Return Filter
Perkins models:
· B-3 Inspect the Tires, Wheels and
Lug Nut Torque
· B-4 Perform Engine Maintenance -
Perkins Models
· C-4 Perform Engine Maintenance -
Diesel Models
· D-2 Replace the Hydraulic Tank
Return Filter