Genicom microLaser 210, User Giude

Page: 51 / 212

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 3-7
Paper Menu
Paper Menu
The Paper Menu provides access to the printer settings for various paper-handling functions. Use
the following procedure to enter the paper menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “ Paper Menu ” is shown on the second line of the dis-
play.
3. Press the SELECT button to enter the Paper Menu.
4. Press the NEXT button to move through the submenus: Copies , Default Source , Manual
Feed , Output Tray , Media Size/Type , Tray Linking , Blank Pages , and Output Linking .
5. Use the procedures in the following table to access and change the printer paper-handling set-
tings:
Submenus Default Setting Available Settings Procedure for Changing Setting
Copies
This submenu allows
you to change the
number of copies
printed.
1 Numbers 1 - 999 1. Press NEXT or PREVIOUS to
increase or decrease the number of
copies printed.
2. Press SELECT to save this setting.
Duplex
This submenu allows
you to turn the
duplexer on or off.
Off Off
On 1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
Duplex Bind
This submenu allows
you to define the
binding edge for
duplexed sheets.
Long Edge Long Edge
Short Edge 1. Press NEXT or PREVIOUS to toggle
between LONG EDGE and SHORT
EDGE.
2. Press SELECT to save this setting.
Default Source
This submenu allows
you to choose a
default paper source
from a list of all
installed sources.
Tray 1 Front
Tray 1
Tray 2 (optional)
Tray 3 (optional) 1. Press NEXT or PREVIOUS to scroll
through the list of available sources
of paper.
2. Press SELECT to set a source as the
default.
Manual Feed
This submenu allows
you to turn the manual
feed on or off.
Off On
Off 1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
Output Tray
This submenu allows
you to choose a
default output tray
from a list of all
installed output trays.
Face Down Tray Face Down Tray
Offset Tray (optional) 1. Press NEXT or PREVIOUS to scroll
through the list of available output
trays.
2. Press SELECT to set a tray as the
default.